View MN101C65D_256262.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MN101C65C , MN101C65D
Type ROM (x8-bit) x RAM (x8-bit) x Package Minimum Instruction Execution Time
MN101C65C (under planning) 48 K 2K MN101C65D (under planning) 64 K 2K QFP100-P-1818B *Pb free (under planning), LQFP100-P-1414 *Pb free (under planning) 0.1 s (at 4.5 V to 5.5 V, 20 MHz) 0.25 s (at 2.7 V to 5.5 V, 8 MHz) 62.5 s (at 2.0 V to 5.5 V, 32 kHz)* * The lower limit for operation guarantee for flash memory built-in type is 2.5 V. * RESET * Watchdog * External 0 * External 1 * External 2 * External 3 * External 4 (key interrupt selectable) * External 5 (key interrupt dedicated) * External 6 * External 7 * Remote control * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 6 * Time base * Timer 7 (2 systems) * Timer 8 (2 systems) * Serial 0 (2 systems) * Serial 2 * A/D conversion finish Timer counter 0 : 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier, simple pulse width measurement) (square-wave/ PWM output to large current terminal P50 possible) Clock source ************************ 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ********************* coincidence with compare register 0 Timer counter 1 : 8-bit x 1 (square-wave output, event count, synchronous output event) Clock source ************************ 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/8192, 1/32768 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ********************* coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2 : 8-bit x 1 (square-wave output, additional pulse type 10-bit PWM output, event count, synchronous output event, simple pulse width measurement) (square-wave/PWM output to large current terminal P52 possible) Clock source ************************ 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ********************* coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial 0 baud rate timer) Clock source ************************ 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source ********************* coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 6 : 8-bit freerun timer Clock source ************************ 1/1 of system clock frequency; 1/1, 1/4096, 1/8192 of OSC oscillation clock frequency; 1/1, 1/ 4096, 1/8192 of XI oscillation clock frequency Interrupt source ********************* coincidence with compare register 6 Timer counter 7 : 16-bit x 1 (square-wave output, IGBT/16-bit PWM output (cycle / duty continuous variable), event count, synchronous output evevt, pulse width measurement, input capture) (square-wave/PWM output to large current terminal P51 possible) Clock source ************************ 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source ********************* coincidence with compare register 7 (2 lines)
Interrupts
Timer Counter
86
MAD00021CEM
MN101C65C , MN101C65D
Timer Counter (Continue)
Timer counter 8: 16 bit x 1 (square-wave/16-bit PWM output [duty continuous variable], event count, pulse width measurement, input capture) (square-wave/PWM output to large current terminal P53 possible) Clock source ********************* 1/1, 1/2, 1/4, 1/16, 1/128 of system clock frequency; 1/1, 1/2, 1/4, 1/16, 1/128 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source **************** coincidence with compare register 8 (2 lines) Timer counters 7, 8 can be cascade-connected. (square-wave output, PWM, input capture, pulse width measurement is possible as a 32-bit timer.) Time base timer (one-minute count setting) Clock source ********************* 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency Interrupt source **************** 1/128, 1/256, 1/512, 1/1024, 1/8192, 1/32768 of clock source frequency Watchdog timer Interrupt source **************** 1/65536, 1/262144, 1/1048576 of system clock frequency
Serial Interface
Serial 0 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; 1/2 of pulse output of timer counter 3 frequency ; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency Serial 2 : synchronous type x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; 1/2 of pulse output of timer counter 3 frequency; 1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency
Remote Control Interface
Remote control output: timer 0 and 3 output: the remote control carrier output of 1/2 and 1/3 duty. Remote control reception: correspondence with low speed clock waiting correspondence with AEHA (Association for Electric Home Appliances) format (selection of a formart is available by the set-up) 77 6 * Common use * Specified pull-up resistor available * Input/output selectable (bit unit) * Common use * Specified pull-up resistor available
I/O Pins A/D Inputs LCD
I/O Input
10-bit x16-ch. (with S/H) 47 segments x 4 commons (static, 1/2, 1/3, or 1/4 duty) LCD power supply separated from VDD (usable if VDD VLCD 5.5 V) LCD power step-up circuit contained (3/2, 2 and 3 times) LCD power shunt resistance contained Buzzer output, remote control carrier signal output, high-current drive port
Special Ports Electrical Characteristics
Supply current
Limit Parameter Symbol IDD1 Operating supply current IDD2 IDD3 IDD4 Supply current at HALT IDD5 IDD6 Supply current at STOP IDD7 Condition min fosc = 20 MHz, VDD = 5 V fosc = 8 MHz, VDD = 5 V fx = 32 kHz, VDD = 3 V fx = 32 kHz, VDD = 3 V, Ta = 25C fx = 32 kHz, VDD = 3 V, Ta = -40C to +85C VDD = 5 V, Ta = 25C VDD = 5 V, Ta = -40C to +85C typ 25 10 30 4 max 60 25 100 8 t.b.f (30) 2 t.b.f (50) mA mA A A A A A Unit
See the next page for pin assignment and support tool.
MAD00021CEM
87
Pin Assignment
PB5/SEG41/AN13/SBO0B/TXDB PB6/SEG40/AN14/SBI0B/RXDB PB7/SEG39/AN15/SBT0B P47/SEG26/KEY7/SDO7 P46/SEG27/KEY6/SDO6 P45/SEG28/KEY5/SDO5 P44/SEG29/KEY4/SDO4 P43/SEG30/KEY3/SDO3 P42/SEG31/KEY2/SDO2 P41/SEG32/KEY1/SDO1 P40/SEG33/KEY0/SDO0
PB4/SEG42/AN12
PB3/SEG43/AN11
53
PB2/SEG44/AN10
52
P31/SEG37/IRQ7
P30/SEG38/IRQ6
75
73 74
P65/SEG20/A5 P66/SEG19/A6 P67/SEG18/A7 P70/SEG17/A8 P71/SEG16/A9 P72/SEG15/A10 P73/SEG14/A11 P74/SEG13/A12 P75/SEG12/A13 P76/SEG11/A14 P77/SEG10/A15 P35/SEG9/A16 P36/SEG8/A17 P87/SEG7/D7 P86/SEG6/D6 P85/SEG5/D5 P84/SEG4/D4 P83/SEG3/D3 P82/SEG2/D2 P81/SEG1/D1 P80/SEG0/D0 P90/COM0 P91/COM1 P92/COM2 P93/COM3
76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 1
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
51 50 49 48 47 46 45 44 43 42 41 40
PB1/SEG45/AN9
P64/SEG21/A4
P63/SEG22/A3
P62/SEG23/A2
P61/SEG24/A1
P60/SEG25/A0
P34/SEG34
P33/SEG35
P32/SEG36
PB0/SEG46/AN8 VREFPA7/AN7 PA6/AN6 PA5/AN5 PA4/AN4 PA3/AN3 PA2/AN2 PA1/AN1 PA0/AN0 VREF+ VDD P25/RMIRQ P24/IRQ4 P23/IRQ3 P22/IRQ2 P21/IRQ1/ACZ P20/IRQ0 P15/TM8IO P14/TM7IO P13/TM3IO P12/TM2IO P11/TM1IO P10/RMOUT/TM0IO P06/NDK/BUZZER
MN101C65C MN101C65D
39 38 37 36 35 34 33 32 31 30 29 28 27
2
4 3 5
6 7
8 9
10 11
12 13
14 15
16 17
18 19
20 21
22 23
24
26 25
NWE/TM0O/LED0/P50
NRE/TM7O/LED1/P51
NCS/TM2O/LED2/P52
TM8O/LED3/P53
VLCIN2/VLC2
VLCIN3/VLC3
LED4/P54
KEY10/TXDA/SBO0A/PO0
KEY11/RXDA/SBI0A/PO1
VDD
VLC1
OSC1
OSC2
MMOD
NRST/P27
VDD
VSS
XO
C1
C2
XI
KEY12/SBT0A/PO2
KEY13/SBO2/PO3
KEY14/SBI2/PO4
QFP100-P-1818B *Pb free (under planning) LQFP100-P-1414 *Pb free (under planning)
Support Tool
In-circuit Emulator Flash Memory Built-in Type
PX-ICE101C / D + PX-PRB101C65-QFP100-P-1818B (under planning) Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CF65D (under planning) 64 K 2K 0.1 s (at 4.5 V to 5.5 V, 20 MHz) 0.25 s (at 2.7 V to 5.5 V, 8 MHz) 62.5 s (at 2.5 V to 5.5 V, 32 kHz) Package QFP100-P-1818B *Pb free (under planning), LQFP100-P-1414 *Pb free (under planning)
88
KEY15/SBT2/PO5
MAD00021CEM
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR

▲Up To Search▲

Price & Availability of MN101C65D

	To Download MN101C65D Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .